WATER DISINFECTION AND TREATMENT - WITH UVC SYSTEMS FROM UST.

The UVC systems are manufactured to an extremely high standard at the UST GmbH site in Gera. Depending on the quantity and quality of the water, we produce different systems in-house. The reactor is completely made of polished stainless steel (V4A). The water inlets and outlets, as well as the cylinder for fixing the UVC lamp, are also elaborately welded stainless steel components. This design avoids using PVC (polyvinyl chloride), which becomes brittle due to UVC radiation and water pressure. The systems are controlled by means of tried and tested electronics that are specially adjusted to the UVC lamp used.

UVC systems are available in a wide range of power ratings from 16 to 240 watts. This allows between 330 and 20,000 litres of water to be sterilised per hour. All UVC systems can be operated at pressures of at least 6 bar. The PURE 1.0 UVC system even has a maximum pressure of up to 10 bar. To keep the water disinfection performance at a continuous level, we recommend changing the UVC lamp once a year. With regard to installation, the ballast unit (with PURE 1.0 also possible as a plug-in power supply unit) must be mounted on a wall so that it is not exposed to direct sunlight. To prevent possible breakage of the UVC lamp and the surrounding immersion pipe, these are supplied separately packaged and must be inserted in accordance with the operating instructions before commissioning.

For the commissioning of the system, it may be useful to commission the installer you trust. We will be happy to advise you on all questions relating to UVC systems, UVC lamps and UVC filters. Our production facility for UVC systems is located in Gera, Thuringia. We are at your disposal with advice and assistance and will be happy to explain to you how our UVC systems work and what they can be used for.